Silicone Rubber Electronics parts
Silicone Rubber Electronics parts
Application LSR silicone rubber
LSR silicone rubber mainly used for baby products making: nipple, milk bottle and so on.
For kitchen supplies making: crisper, cake set, silicone shovel,dim sum mesh and so on.
For diving s
Silicone Rubber Electronics parts
Application LSR silicone rubber
LSR silicone rubber mainly used for baby products making: nipple, milk bottle and so on.
For kitchen supplies making: crisper, cake set, silicone shovel,dim sum mesh and so on.
For diving supplies making: cap, googles, and so on.
For articles of daily use making: toothbrush, cup, cup pad, and so on.
LIQUID SILICONE RUBBER FOR KEYBOARD COVER APPLICATIONS:
injection molding silicone rubber is applicable for keyboard cover(keyboard skin) , cellphone case, elastomer parts, stoppers, medical devices and parts, baby care products, toothbrush, cake mold, household products, diving equipment, adult Soother, insulation O-ring ,etc.
LIQUID SILICONE RUBBER FOR KEYBOARD COVER CHARACTERISTICS:
1- This product is supplied as a two-part kit. It is very easy to handle and ideal for manufacturing parts in large volumes, with low unit costs and superior quality.
2- Low compression set, ability to resist extreme temperatures of heat and cold and changing of the temperature.
3- Excellent tear strength (≥35KN/m), High transparency, almost non shrinkage, Good resilience, Anti-yellowing.
4- Strong weatherability (range of -60°C to 250°C).
5- Conform to USA CFR21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.
6-Originally, it is transparent material, favourable for many kinds products.
LIQUID SILICONE RUBBER FOR KEYBOARD COVER CURING CONDITION:
Mix up component A and component B by the ratio of 1:1. The mixture will be transformed into a elastomer of size 150mm*150mm*2mm within 1 mins under temperature of 150 centi degrees.
LIQUID SILICONE RUBBER FOR KEYBOARD COVER NOTICE:
1- After the component A and component B are mixed under 20°C, the effective operating time is 5 days in sealing status, The effective operating time will be shorten in case of rising temperature.
2- The viscosity, hardness and appearance can be adjusted, according to specific needs.
LIQUID SILICONE FOR MOLDING HUMAN BODY TECHNICAL DATASHEET ：
| Model | Viscosity | Hardness | Tensile | Tear | Elongation | Mixing | Operating | Curing |
| (cps) | (A°) | Strength | Strength | (≥%) | ratio | Time(min) | Time | |
| (Mpa) | (kN/m) | (hr, 25℃) | ||||||
| GR800 | 3000 | 0±2 | 4.5 | 5 | ≥300 | 1:1/10:1 | 30~60 | 15~30 |
| GR805 | 4000 | 5±2 | 3.5 | 12 | ≥400 | 1:1/10:1 | 30~60 | 15~30 |
| GR810 | 4500 | 10±2 | 5 | 17 | ≥400 | 1:1/10:1 | 30~60 | 15~30 |
| GR815 | 4500 | 15±2 | 5.5 | 19 | ≥400 | 1:1/10:1 | 30~60 | 15~30 |
| GR820 | 6000 | 20±2 | 7.5 | 32 | ≥400 | 1:1/10:1 | 30~60 | 15~30 |
| GR825 | 35000 | 25±2 | 7 | 16 | ≥450 | 1:1/10:1 | 30~60 | 15~30 |
| GR830 | 35000 | 30±2 | 7 | 16 | ≥400 | 1:1/10:1 | 30~60 | 15~30 |
| GR840 | 25000+10000/-15000 | 40±3 | 8.5 | 18 | ≥250 | 1:1/10:1 | 30~60 | 3~5 |
Note: Above technical datasheet of this product is notthe fixed parameters, it's adjustable according to customers requirement.
Copy product links
Long by picture save/share
INQUIRY
enquiry form：
Inquiry Content：
You have no items to require
Add Successfully
INQUIRY
enquiry form：
Inquiry Content：
You have no items to require
Add Successfully
86-13143415646
Contact：
Tel: 86-755-23000620 Fax: 86-755-23000621
Email:info@galaxy3dm.com/info@seetoptech.com
Address: A3 , Dingfeng Industrial Zone, Fuyong Town, Shenzhen, China
Galaxy 3D Manfacturing Solution
Copyright (©) 2020 Shenzhen Seetop Technology Co.,Limited
